Modification of a Dionex System 12 ion chromatograph for sequential determination of the main components in atmospheric precipitation

A modification of a Dionex System 12 ion chromatograph is described which enables organic anions (acetate and formate), inorganic cations (ammonium, sodium and potassium) and inorganic anions (chloride, nitrate and sulphate) to be determined sequentially in one measuring procedure. The modified instrument consists of a programmable controller unit, a conductimetric meter, two conductimetric detectors of the Dionex System 12 ion chromatograph, the HPIC-AS4A and HPIC-CS3 modern separation units, AMMS-1 and CMMS-1 micro-membrane suppressor columns, a unique system of valves from Dionex and two dual pumps from Biotronik. The limits of detection are between about 1 and 3 micrograms/l for chloride, nitrate and sulphate and between about 2 and 10 micrograms/l for acetate, formate, ammonium, sodium and potassium. The reliability of the method was demonstrated by analysing two NBS simulated rain water Standard Reference Materials. Some examples are given of the application of the method to the sequential determination of the main precipitation components in typical samples from urban and rural regions of the F.R.G. The ion concentrations varied between about 0.02 and 300 mg/l.     

Liquid chromatography of polymer mixtures by a combination of exclusion and full adsorption mechanisms. Three- and four-component polymer blends

Summary Coupling of full adsorption-desorption and size-exclusion chromatography (FAD-SEC) has been applied to the separation and molecular characterization of three- and four-component polymer blends. The method is based on the full adsorption of alln orn−1 components of the polymer blend in a specially designed FAD minicolumn. By appropriate eluent switching the adsorbed polymers are desorbed stepwise from the FAD minicolumn into an on-line SEC column for molecular characterization. It is shown that the desorption isotherms of particular blend components give valuable information about the appropriate displacer composition. The exact position of the desorption isotherms depends, however, both on the amount of polymer adsorbed and in the presence of other, chemically different, polymers within FAD column. The nature and composition of the displacer must, therfore, be adjusted if the intervals between the desorption of particular blend components are to be large enough to prevent displacement overlap. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997.     

Autoxidation of cyclohexane: conventional views challenged by theory and experiment.

In spite of its industrial importance, the detailed reaction mechanism of cyclohexane autoxidation by O2 is still insufficiently known. Based on quantum chemical potential energy surfaces, rate coefficients of the primary and secondary chain propagation steps involving the cyclohexylperoxyl (CyOO) radical were evaluated using multiconformer transition-state theory. Including tunneling and hindered-internal-rotation effects, the rate coefficient for hydrogen-atom abstraction from cyclohexane (CyH) by CyOO was calculated to be k(T)= 1.46 x 10(-11) x exp(-17.8 kcal mol(-1)/ RT) cm3s(-1) (300-600K), close to the experimental data. A "Franck-Rabinowitch cage" reaction between the nascent cyclohexylhydroperoxide (CyOOH) and cyclohexyl radical, products from CyOO + CyH, is put forward as an initially important cyclohexanol (CyOH) formation channel. alphaH abstraction by CyOO. from cyclohexanone was calculated to be only about five times faster than that from CyH, too slow to explain all the observed side products. The a-hydrogen (alphaH) abstractions from CyOH and CyOOH by CyOO. are predicted to be about 10 and 40 times faster, respectively, than the CyOO. +CyH reaction. The very fast CyOO.+CyOOH reaction proceeds through the unstable Cy-alphaH .OOH radical that decomposes spontaneously into the ketone (Q=O) plus the OH radical; the "hot" .OH is found to produce the bulk of the alcohol via a second, "activated cage" reaction analogous to that above. It is thus shown how the very reactive CyOOH intermediate is the predominant source of ketone and alcohol, while it also leads to some side products. The alpha-hydroxycyclohexylperoxyl radical formed during the moderately fast oxidation of CyOH is shown to decompose fast into HO2 + cyclohexanone in a rapidly equilibrated reaction, which constitutes a smaller, second ketone source. These two fast cyclohexanone forming routes avoid the need for unfavorable molecular routes hitherto invoked as ketone sources. The theoretical predictions are supported and complemented by experimental findings. The newly proposed scheme is also largely applicable to the oxidation of other hydrocarbons, such as toluene, xylene, and ethylbenzene.     

A novel reactivity of SeO(2) with 1,3-dienes: formation of syn 1,2- and 1,4-diols via a facile C-Se bond oxidation

[reaction: see text] A novel reaction between 1,3-dienes and selenium dioxide to give syn 1,2- and 1,4-diol cyclic selenites was studied in detail. This study indicates that an initial concerted [4 + 2] cycloaddition followed by a stereospecific carbon-selenium bond oxidation is involved in this unprecedented syn dihydroxy addition reaction mediated by selenium dioxide.     

Solid-phase extraction of fluoxetine and norfluoxetine from serum with gas chromatography-electron-capture detection

A rapid, selective, and sensitive method is described for the purification and analysis of fluoxetine and norfluoxetine using a solid-phase extraction column and gas chromatography-electron-capture detection. Linear quantitative response curves for fluoxetine and norfluoxetine are generated over a concentration range of 20-200 ng/ml. Overall extraction efficiency of the extraction procedure is found to be greater than 90% and greater than 75% with correlation coefficients of 0.997 and 0.993 for fluoxetine and norfluoxetine, respectively.     

Zeta-potentials of self-assembled surface micelles of ionic surfactants adsorbed at hydrophobic graphite surfaces

The zeta-potentials of the self-assembled surface ionic surfactants (sodium dodecyl sulfate—SDS and hexadecyltrimethyl ammonium bromide—CTAB) on graphite surfaces were determined both from streaming potential and electrophoretic mobility measurements. The adsorption of the surfactants at graphite–liquid interfaces has been studied using atomic force microscopy (AFM) soft-contact imaging which shows the formation of linear, parallel hemicylinders with headgroups oriented towards the solution. The magnitude of the zeta-potential increased with an increase in surfactant concentration, reaching a constant value at a concentration corresponding to the point of surface micelle formation as confirmed from AFM imaging. The streaming potential and electrophoretic mobility measurements showed that the zeta-potentials of SDS and CTAB surface micelles adsorbed at the graphite surface were about −75 and +70 mV, respectively, well in agreement with the values reported for bulk phase micelles in the literature.     

Gas Hydrate Formation in Reversed Micelles

We describe a technique to modify protein solubility and optimize enzyme activity in reversed micellar solutions. The technique is based on the ability of hydrates of natural gas to form in the micro-aqueous phase. Clathrate hydrates are crystalline inclusions of water and gas, and their formation in bulk water has traditionally been studied with relevance to natural gas recovery. We have found that hydrates can form in the environment of the microaqueous pools of reversed micelles, and that their extent of formation can be well controlled through the thermodynamic variables of temperature and pressure. Additionally, formation of hydrates affects the size and aggregation number of the micelles, and thus influences the solubility and conformation of encapsulated proteins. We demonstrate how the concept can be used in two applications: (i) protein extraction into reversed micelles and subsequent recovery, and (ii) optimization of enzyme activity in reversed micelles.     

Potentiometric titration of sorbed hydrogen on palladium carrier catalysts

A method of determination of adsorbed and absorbed hydrogen on palladium catalysts with carbon carriers is suggested and verified. The method allows H_ad and H_ab to be determined with an accuracy of about 10% using catalysts containing at least 5% Pd.

---

- . . . 10% , , - , 5% Pd.

     

Modification of the electrokinetic properties of reversible electrophoresis gels for the separation and preparation of DNA

The effect of adding linear polymers to a novel reversible electrophoretic was measured. Reversible gels are formed using the polyanionic carbohydrate polymer, gellan gum. Gellan gum forms strong stable gels in the presence of divalent cations or diamines. The gels are reversible (return to solution) by changing the ionic environment or pH. Gellan gum is an anionic polymer, and the electrophoresis gels have considerable electroosmotic flow (EOF) toward the negative electrode. We measured the EOF in gellan gum electrophoresis gels as a function of gel concentration, buffer composition, and linear polymer additive. The linear polymers used in this study were polyethylene oxide and hydroxyethyl cellulose. Both polymers reduced EOF in the gels, in a manner dependent on molecular weight. Polymers with high molecular weight were more effective at reducing EOF. The addition of polymers increased the resolution of low molecular weight DNA. Native gellan gum resolved DNA from approx 50,000 to 1000 bp. Addition of the polymers resolved DNA down to approx 50 bp, in some instances. The influence of the polymers on circular plasmid DNA was also investigated. Addition of high molecular weight polyethylene oxide reduced the electrophoretic mobility of the nicked circular form compared to the supercoiled form.     

High-pressure adsorption capacity and structure of CO2 in carbon slit pores: theory and simulation

We present new simulation results for the packing of single-center and three-center models of carbon dioxide at high pressure in carbon slit pores. The former shows a series of packing transitions that are well described by our density functional theory model developed earlier. In contrast, these transitions are absent for the three-center model. Analysis of the simulation results shows that alternations of flat-lying molecules and rotated molecules can occur as the pore width is increased. The presence or absence of quadrupoles has negligible effect on these high-density structures.